The Ins and Outs of Assessment Validation: How to Validate Assessments

The Ins and Outs of Assessment Validation: How to Validate Assessments

Blog Article

Registration brings RTOs many duties like annual declarations, AVETMISS reporting, and marketing compliance, yet validation often proves to be the most feared.

We have numerous articles on validation, but let's go back to the term itself. ASQA defines validation as a quality review of the assessment process.

Validation involves checking which aspects of an RTO's assessment process are accurate and identifying areas for improvement. With a solid understanding of its components, validation is less intimidating.

Clause 1.8 in the SRTOs 2015 outlines that RTOs must ensure their assessment systems, including RPL, comply with training package requirements and the Principles of Assessment and Rules of Evidence.

According to the standards, RTOs must conduct two types of validation.

The first type of validation ensures that your RTO's assessment meets the requirements of the training package within your scope.

The second validation type ensures that assessments adhere to the principles of assessment and rules of evidence.

It suggests that validation takes place before and after the assessment. This article focuses on the first type—assessment tool validation.

The Basics of the Two Types of Assessment Validation

Defining Assessment Validation

As noted earlier and in previous blog posts, validation comprises two stages: (1) assessment tool validation and (2) post-assessment validation.

Assessment tool validation, often referred to as pre-assessment validation or verification, deals with ensuring all unit requirements are addressed as per the first part of the clause, ensuring complete workbook compliance.

Post-assessment validation, in contrast, is about ensuring the implementation side, where Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.

For this piece, our emphasis will be on assessment tool validation.

How Assessment Tool Validation is Conducted

With a grasp of the two validation types, let’s focus on assessment tool validation.

When is Assessment Tool Validation Conducted?

The goal of assessment tool validation is to make sure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

Thus, whenever new learning resources are purchased, you must conduct assessment tool validation before allowing student use.

You don’t have to wait for the next scheduled validation in your 5-year cycle. Validate new resources right away to ensure they are ready for students.

However, there are additional reasons to conduct this type of validation. Perform assessment tool validation also when you:

- you update resources
- new training products are added to your scope
- your course includes training product updates
- learning resources get identified as a risk during your risk assessment

ASQA's risk-based regulation approach means RTOs should perform regular risk assessments. If students complain about learning resources, it's a perfect time for assessment tool validation.

Selecting Training Products for Validation

It's crucial to remember this validation ensures compliance of all learning resources before they are used. All RTOs should validate resources for each unit.

Resources Needed to Start Assessment Tool Validation

Learning Resources

Since you are validating your assessment tools, you will require the entire suite of your learning resources:

Mapping tool – the first document to check. It indicates which assessment items align with unit requirements, making validation faster.

Learner/student workbook – ensure it's appropriate for use as an assessment tool. Check if instructions are clear and answer fields are sufficient. This is a frequent gap.

Assessor guide/marking guide – ensure sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.

Other related resources – such as checklists, registers, and templates created independently from the workbook and marking guide. Validate them to ensure they are suitable for the assessment task and address unit requirements.

Validation Committee

Clause 1.11 defines the requirements for validation panel members, stating validation can involve one or more individuals. RTOs usually require all trainers and assessors to be present, sometimes including industry experts.

Together, your validation panel should possess:

Vocational competencies and current industry skills applicable to the unit being validated

Current expertise and skills in vocational teaching and learning

Either one of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or its replacement

Assessment validation checklist/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Using a validation tool benefits both the validation process and documentation. It makes it easier to comprehend how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can act as evidence that you have validated your resources before they are used by students.

ASQA does not provide a recommended or required template for assessment tool validation, but many templates can be found online. These tools often have validators review the tools as a whole to verify if they meet the principles of assessment.

Assessment Principles Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

Though these templates make validation easier, they can lead to judgment errors because they provide little room for comments on each assessment item.

A more detailed template is highly recommended for inspecting each unit requirement and the assessment items that align with them. Below is an example:

Element Performance Criteria Instructions for Assessment Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What Needs Inspection?

As outlined in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.

Assessment Basic Principles
Fairness – Are equal opportunities and access ensured in the assessment process?

Flexibility – Does the assessment accommodate different options to demonstrate competence according to various needs and preferences?

Validity – Does the assessment evaluate what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment achieve consistent results every time, no matter who conducts the training? Will different assessors consistently decide on skill competence?

Key Rules of Evidence

Validity – Is the evidence verifying that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there enough evidence to confirm the learner has the required skills and knowledge?

Authenticity – Does the assessment tool verify that the work is the candidate’s own?

Currency – Are the assessment tools based on current units of competency and up-to-date industry practices?

Although these are regularly covered in VET professional development and nationally recognised training, numerous tools still struggle to meet these requirements.

To avoid using learning resources that leave certain unit requirements unaddressed, ensure you adhere to these guidelines:

Live Up to Your Words

Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Carry out each of the following tasks at least once with two different website babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:

diapering

prepare bottles, bottle-feed babies, and clean equipment

solid food prep and feeding infants

respond appropriately to baby signs and cues

prepare babies for sleep and soothe them

monitor and encourage suitable physical exploration and gross motor skills for the age

Getting students to describe changing nappies for babies under 12 months doesn’t meet the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Look Out for Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t enough.

All or Nothing

Mind the lists. In the previous example, if students perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Add More Specificity

Each assessment item needs clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions are not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What kinds of information can be included in a work package?

The answer could include:

Compulsory resources

Relevant costs

Activity duration

Allocated roles and responsibilities

If an assessment item requires multiple answers, specify the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.

The same applies to assessment items with double-barrelled questions or questions that ask for more than one answer simultaneously. These can confuse both students and assessors, as illustrated in the example below:

Name a hazard and/or environmental concern in the work area and choose the most effective hazard control hierarchy.

Answers might include, but are not limited to:

Weather conditions – isolating the work area, engineering controls, PPE

Work area and ground conditions – elimination, isolation, engineering controls

People – isolation, engineering controls, administration

Structural hazards – substitution, isolation, engineering controls

Chemical hazards – isolation, engineering, administration

Equipment or machinery – isolating, use of engineering controls, administrative controls

Avoiding double-barrelled questions simplifies responses for students and allows assessors to judge competence accurately.

Given these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” But these guarantees require waiting for an audit before rectifying noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.